Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. NAS1160-5-19D specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.498in. ⁓1/2"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
1.686in. ⁓1-11/16"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
hexagon
A measurement from the bottom to the top of the head,in distinction from depth.
0.156in. ⁓5/32"
0.492in. and 0.502in.
The national stock number or the identification information of the end equipment for which the item is a part.
F-35
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.313in. ⁓21/64"
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
24
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel corrosion resisting
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjf
Answers.
Unjf
Steel corrosion resisting
24
Hexagon
0.498 inches
Right-hand
3a
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5306 ⁓ Bolts
NSN 5306-01-625-3597 BOLT,SHOULDER
Used on F-35. unjf thread series 24 thread quantity per inch hexagon head style 0.498" thread length right-hand 3a thread class
- NIIN
- 016253597
- NIIN Date
- 02/03/14
- Schedule B
- 7318152000
- Name Code
- 04905
- FIIG
- A003B0
- DEMIL / ITAR
- Uncontrolled item (Code )
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- --
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
Availability for NAS1160-5-19D A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
- Commodity (for shipments via water)
- Bolts or nuts (iron or steel),(less than 35 feet)
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other bolts with similar characteristics
Nothing similar to this part number was found in our inventory
NAS1160-5-19D / Bolt,shoulderWhat is the formal definition of this item?
An externally threaded fastener whose threaded portion is of one nominal diameter, no. 10 (0.190 in.) (5 mm) or larger. it has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. the head is not designed to be held or driven with an inserted drivers. a locking feature may be incorporated in the design of the head or threads. for items with a thread diameter smaller than no. 10 (0.190 in.) (5 mm) and those items with an inserted drive head, use screw, shoulder. for items which are no. 10 (0.190 in.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use bolt, externally relieved body. excludes thumbscrew.
