Serving our customers with quality and safety first.
3a
RIGHT-Hand
0.313in. and 0.333in. ⁓11/32"
1.553in. and 1.573in. ⁓1-37/64"
hexagon
0.109in. and 0.141in. ⁓9/64"
0.367in. and 0.377in.
0.2445in. first shoulder and 0.2460in. first shoulder
1.230in. first shoulder and 1.250in. first shoulder
0.070in. first hole and 0.080in. first hole
0.190in. (UTS #10)
32
220000 pounds per square inch
46.0 rockwell c and 50.0 rockwell c
1.415in. first hole and 1.435in. first hole
round first shoulder
supply with dry film lubricant per MIL-L-46010 on grip only
steel comp H11
AMS6485 assn std single material response or AMS6487 assn std single material response
cadmium threads and chromate threads or nickel threads and cadmium threads
cadmium head and chromate head or nickel head and cadmium head
NAS672 assn std 1st treatment response head or AMS2416 assn std 2nd treatment response head
NAS672 assn std 1st treatment response threads or AMS2416 assn std 2nd treatment response threads
unjf
1EA
Unjf
Steel comp h11
32
Hexagon
0.313 inches minimum and 0.333 inches maximum
Right-hand
3a
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5306 ⁓ Bolts
unjf thread series cadmium head surface treated supply with dry film lubricant per mil-l-46010 on grip only 32 thread quantity per inch hexagon head style 0.313" thread length right-hand 3a thread class
1. | C4356N3D1240 | Cage 81755 |
2. | C4356N3D1240 | Cage 56878 |
3. | SII1058CR3-1240 | Cage 57928 |
4. | VCB0008A3-1240 | Cage 06710 |
5. | PBF4356N3D1240 | Cage 27624 |
6. | VS2986CR3-1240 | Cage 92215 |
7. | BM4356N3D-1240 | Cage 17446 |
8. | 71657CD-3-1240 | Cage 56878 |
Nothing similar to this part number was found in our inventory
An externally threaded fastener whose threaded portion is of one nominal diameter, no. 10 (0.190 in.) (5 mm) or larger. it has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. the head is not designed to be held or driven with an inserted drivers. a locking feature may be incorporated in the design of the head or threads. for items with a thread diameter smaller than no. 10 (0.190 in.) (5 mm) and those items with an inserted drive head, use screw, shoulder. for items which are no. 10 (0.190 in.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use bolt, externally relieved body. excludes thumbscrew.