AIC1690C7D36

AIC1690C7D36 Shoulder Bolt

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. AIC1690C7D36 specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

3a

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

0.629in. ⁓41/64"

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

2.872in. and 2.912in. ⁓2-59/64"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

hexagon

Head Height
A measurement from the bottom to the top of the head,in distinction from depth.

0.265in. and 0.297in. ⁓19/64"

Width Between Flats

0.740in. and 0.752in.

Shoulder Diameter
The length of a straight line which passes through the center of the shoulder and terminates at the circumference.

0.495in. first shoulder and 0.499in. first shoulder

Shoulder Length
The length of the enlarged portion of the shank on the item,in distinction from width or diameter.

2.260in. first shoulder and 2.280in. first shoulder

Shank Unthreaded Hole Diameter
The length of a straight line which passes through the center of the shank unthreaded hole,and terminates at the inside circumference.

0.106in. concentric hole

End Item Identification
The national stock number or the identification information of the end equipment for which the item is a part.

C-17A aircraft

Nominal Thread Diameter
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.

0.4375in. ⁓29/64"

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

20

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

160000 pounds per square inch

Distance From Head Largest Bearing Surface To Shank Hole Center
The distance from the shank hole centerline to the largest bearing surface of the head.

1.938in. all holes

Shoulder Shape
The physical configuration of the unthreaded portion of a body adjacent to the head which is larger than the diameter of the shank.

round first shoulder

Part Name Assigned By Controlling Agency
The name assigned to the item by the government agency or commercial organization controlling the design of the item.

bolt, SHOULDER-Hexagon head, A286

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

iron alloy 660

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

ams 5731 assn std single material response or ams 5737 assn std single material response

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

chromium grip

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

chromium primary washer

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

passivate

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-C-320, class 2, type 1 fed spec single treatment response grip

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-C-320, class 2, type 1 fed spec single treatment response primary washer

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-35 fed spec single treatment response

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unjf

Answers.

What quantity is this sold in?

1EA

What class is the thread series?

Unjf

What material is the shoulder bolt made of ?

Iron alloy 660

What is the thread quantity per inch?

20

What is the head style?

Hexagon

What is the thread length?

0.629 inches

What is the thread direction?

Right-hand

What is the thread class?

3a

What is the NSN for AIC1690C7D36?

5306-01-503-4390

How is this classified for shipping?

Schedule B number: 7318152000
nmfc 093490
Bolts and bolts and their nuts or washers exported in the same shipment

What's the federal classification of AIC1690C7D36?

FSC 5306 ⁓ Bolts

NSN 5306-01-503-4390 BOLT,SHOULDER

Used on c-17a aircraft. unjf thread series passivate surface treated bolt, shoulder-hexagon head, A286 20 thread quantity per inch hexagon head style 0.629" thread length right-hand 3a thread class

NIIN
015034390
NIIN Date
12/17/02
Schedule B
7318152000 
Name Code
04905
FIIG
A003B0
QUP
Historical Price
$250.50 EA
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

1. SLB530D7D36 Cage 16258
2. PBF1602C7D36 Cage 27624
3. FIT7807C7D36 Cage 58998
4. VS3589-7D36C Cage 92215
5. 3D0124C7D36 Cage 88277
6. 1690C7D36 Cage 06725

Major End Users Countries and entities

  • - Department of The Air Force 

Availability for AIC1690C7D36 A member of our team will provide you with a price and availability quote

Request a Quote »

Shipping Information

Special Handling
Other or no special handling required (sh) 
LTL (less than a truck load rating)
50.0 
LCL (less than a car load rating)
Unknown
Special Cargo
No special type of cargo code applicable 
Air Freight (Minimum cargo door size required)
Shipment is not a consolidation and does not exceed 84 inches in any dimension. 
Customs Requirement Classification
Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater 
Commodity (for shipments via water)
Bolts or nuts (iron or steel),(less than 35 feet) 
NMFC (national motor freight code)
093490 BOLT/NUT/SCREW/CLIPS/FASTENER/ETC 
UFC (universal freight code)
50270 

Similar by Design Other bolts with similar characteristics

Nothing similar to this part number was found in our inventory

AIC1690C7D36 / Bolt,shoulderWhat is the formal definition of this item?

An externally threaded fastener whose threaded portion is of one nominal diameter, no. 10 (0.190 in.) (5 mm) or larger. it has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. the head is not designed to be held or driven with an inserted drivers. a locking feature may be incorporated in the design of the head or threads. for items with a thread diameter smaller than no. 10 (0.190 in.) (5 mm) and those items with an inserted drive head, use screw, shoulder. for items which are no. 10 (0.190 in.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use bolt, externally relieved body. excludes thumbscrew.