Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 8 350 208 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
48.0 mm
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
109.0 mm
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
hexagon extended washer
A measurement from the bottom to the top of the head,in distinction from depth.
40.0 mm
55.5 mm
80.5 mm
17.0 mm
The length of a straight line which passes through the center of the shoulder and terminates at the circumference.
40.0 mm first shoulder
The length of the enlarged portion of the shank on the item,in distinction from width or diameter.
61.0 mm first shoulder
The national stock number or the identification information of the end equipment for which the item is a part.
controllable pitch propeller used onboard 270 ft wmec coast guard vessels
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
56.0 mm
A measurement of distance between corresponding points on two adjacent threads measured parallel to the thread axis,expressed in millimeters.
3.00
A numeric-alpha designator indicating established pitch and crest diameter tolerance positions and grades of an external thread.
2a
The physical configuration of the unthreaded portion of a body adjacent to the head which is larger than the diameter of the shank.
round first shoulder
The chemical compound or mechanical mixture properties of which the item is fabricated.
nickel alloy
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
m
Answers.
1EA
M
Nickel alloy
Hexagon extended washer
48.0 millimeters
Right-hand
2a
Schedule B number: 7508900000
Other articles of nickel (excluding cloth, grill & netting of nickel wire)
FSC 5306 ⁓ Bolts
NSN 5306-01-118-8337 BOLT,SHOULDER
Used on controllable pitch propeller board 270 ft wmec coast guard vessels. m thread series hexagon extended washer head style 48.0mm thread length right-hand 2a thread class
- NIIN
- 011188337
- NIIN Date
- 09/12/81
- Schedule B
- 7508900000
- Name Code
- 04905
- FIIG
- A003B0
- QUP
- 1
- Historical Price
- $2,323.80 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 901-WMEC-245-003 ITEM 41 | Cage 4E769 |
Major End Users Countries and entities
- - U.s. Coast Guard
Availability for 8 350 208 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other bolts with similar characteristics
Nothing similar to this part number was found in our inventory
8 350 208 / Bolt,shoulderWhat is the formal definition of this item?
An externally threaded fastener whose threaded portion is of one nominal diameter, no. 10 (0.190 in.) (5 mm) or larger. it has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. the head is not designed to be held or driven with an inserted drivers. a locking feature may be incorporated in the design of the head or threads. for items with a thread diameter smaller than no. 10 (0.190 in.) (5 mm) and those items with an inserted drive head, use screw, shoulder. for items which are no. 10 (0.190 in.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use bolt, externally relieved body. excludes thumbscrew.
