Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 6292191 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2g
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
LEFT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
12.875in. ⁓12-7/8"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
20.312in. ⁓20-5/16"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
headless (setscrew)
The length of a straight line which passes through the center of the shoulder and terminates at the circumference.
1.375in. first shoulder
The length of a straight line which passes through the center of the shoulder and terminates at the circumference.
1.687in. third shoulder
The length of a straight line which passes through the center of the shoulder and terminates at the circumference.
1.875in. fourth shoulder
The length of a straight line which passes through the center of the shoulder and terminates at the circumference.
2.500in. second shoulder
The length of the enlarged portion of the shank on the item,in distinction from width or diameter.
0.469in. second shoulder
The length of the enlarged portion of the shank on the item,in distinction from width or diameter.
0.528in. third shoulder
The length of the enlarged portion of the shank on the item,in distinction from width or diameter.
0.909in. first shoulder
The length of the enlarged portion of the shank on the item,in distinction from width or diameter.
1.187in. fourth shoulder
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
2.500in. ⁓2-1/2"
The minimum and maximum pitch diameter limits of a nonstandard straight screw thread.
+2.2067/+2.2374in.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
2
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
228.0 brinell hultgren and 256.0 brinell hultgren
The physical configuration of the unthreaded portion of a body adjacent to the head which is larger than the diameter of the shank.
round
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
item has 3 additional shoulders:fifth is 2.510 in.dia and 0.375 in.lg; sixth is 4.000 in.dia for lg of 0.156in., then chamfered 45 degrees for lg of 0.469 in; seventh is 1.937 in.dia and 1.969 in.lg; head has keyseat 0.250in. w and 0.377 in.deep; head drilled 0.500 in.DIA-20 UNF-3B; locking featureincluded
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
phosphate manganese or phosphate zinc
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
DOD-P-16232 mil spec single treatment response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
acme
Answers.
1EA
Acme
Steel
2
Headless (setscrew)
12.875 inches
Left-hand
2g
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5306 ⁓ Bolts
NSN 5306-00-629-2191 BOLT,SHOULDER
acme thread series phosphate manganese or phosphate zinc surface treated item has 3 additional shoulders:fifth is 2.510 in.dia 2 thread quantity per inch headless (setscrew) head style 12.875" thread length left-hand 2g thread class
- NIIN
- 006292191
- NIIN Date
- 01/01/63
- Schedule B
- 7318152000
- Name Code
- 04905
- FIIG
- A003B0
- Item Weight
- 21.400lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $1,529.18 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Austria
- - Brazil
- - Spain
- - Canada
- - Republic of Korea
- - Italy
- - Denmark
- - Norway
- - Greece
- - Turkey
Availability for 6292191 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- 50.0
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other bolts with similar characteristics
Nothing similar to this part number was found in our inventory
6292191 / Bolt,shoulderWhat is the formal definition of this item?
An externally threaded fastener whose threaded portion is of one nominal diameter, no. 10 (0.190 in.) (5 mm) or larger. it has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. the head is not designed to be held or driven with an inserted drivers. a locking feature may be incorporated in the design of the head or threads. for items with a thread diameter smaller than no. 10 (0.190 in.) (5 mm) and those items with an inserted drive head, use screw, shoulder. for items which are no. 10 (0.190 in.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use bolt, externally relieved body. excludes thumbscrew.
