Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 4P53550-101A specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
A3A
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.130in. and 0.160in. ⁓11/64"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
4.765in. ⁓4-49/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
chamfer flange
A measurement from the bottom to the top of the head,in distinction from depth.
0.935in. and 0.965in. ⁓31/32"
1.481in. and 1.502in.
3.000in.
3.000in.
The national stock number or the identification information of the end equipment for which the item is a part.
C-5 reliability enhancement RE-Engining program
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
1.750in. ⁓1-3/4"
Those features,not otherwise specified,which may be required for proper functioning of the item.
bushing
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
H12
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
bolt - attach, fwd, inbd & outbd pylon to wing
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
shank diameter is smaller than head of bolt, shank has a groove located toward the end of the bolt; bushing outside diameter is 2.4455 min and 2.4459 max; under groove is smaller dia
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp XM-13
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ams 5629 assn std single material response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjf
Answers.
Unjf
Steel comp xm-13
H12
Chamfer flange
0.130 inches minimum and 0.160 inches maximum
Right-hand
A3a
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5306 ⁓ Bolts
NSN 5306-01-621-7283 BOLT,SHOULDER
Used on c-5 reliability enhancement re-engining program. unjf thread series shank diameter is smaller than head of bolt, shank has a groove located toward the end of the bolt; bushing outside diameter is 2.4455 min bolt - attach, fwd, inbd & outbd pylon to wing H12 thread quantity per inch chamfer flange head style 0.130" thread length right-hand A3a thread class
- NIIN
- 016217283
- NIIN Date
- 09/16/13
- Schedule B
- 7318152000
- Name Code
- 04905
- FIIG
- A003B0
- DEMIL / ITAR
- Uncontrolled item (Code )
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- --
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Air Force
Availability for 4P53550-101A A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
- Commodity (for shipments via water)
- Bolts or nuts (iron or steel),(less than 35 feet)
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other bolts with similar characteristics
Nothing similar to this part number was found in our inventory
4P53550-101A / Bolt,shoulderWhat is the formal definition of this item?
An externally threaded fastener whose threaded portion is of one nominal diameter, no. 10 (0.190 in.) (5 mm) or larger. it has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. the head is not designed to be held or driven with an inserted drivers. a locking feature may be incorporated in the design of the head or threads. for items with a thread diameter smaller than no. 10 (0.190 in.) (5 mm) and those items with an inserted drive head, use screw, shoulder. for items which are no. 10 (0.190 in.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use bolt, externally relieved body. excludes thumbscrew.
