Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 3090893-3 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.460in. and 0.470in. ⁓31/64"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
1.740in. and 1.760in. ⁓1-49/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
double hexagon extended washer
A measurement from the bottom to the top of the head,in distinction from depth.
0.380in. and 0.400in. ⁓13/32"
0.427in. and 0.438in.
0.550in. and 0.570in.
0.090in. and 0.110in.
The length of a straight line which passes through the center of the shoulder and terminates at the circumference.
0.374in. all shoulders
The length of the enlarged portion of the shank on the item,in distinction from width or diameter.
1.280in. all shoulders and 1.290in. all shoulders
The national stock number or the identification information of the end equipment for which the item is a part.
pacer dawn
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.313in. ⁓21/64"
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
24
The physical configuration of the unthreaded portion of a body adjacent to the head which is larger than the diameter of the shank.
round all shoulders
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
used on tfe 1042
The chemical compound or mechanical mixture properties of which the item is fabricated.
iron alloy 660
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ams 7477 assn std single material response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjf
Answers.
Unjf
Iron alloy 660
24
Double hexagon extended washer
0.460 inches minimum and 0.470 inches maximum
Right-hand
3a
Schedule B number: 7318152000
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5306 ⁓ Bolts
NSN 5306-01-346-0518 BOLT,SHOULDER
Used on pacer dawn. unjf thread series used on tfe 1042 24 thread quantity per inch double hexagon extended washer head style 0.460" thread length right-hand 3a thread class
- NIIN
- 013460518
- NIIN Date
- 09/26/91
- Schedule B
- 7318152000
- Name Code
- 04905
- FIIG
- A003B0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Taiwan, Province of China
Availability for 3090893-3 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other bolts with similar characteristics
Nothing similar to this part number was found in our inventory
3090893-3 / Bolt,shoulderWhat is the formal definition of this item?
An externally threaded fastener whose threaded portion is of one nominal diameter, no. 10 (0.190 in.) (5 mm) or larger. it has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. the head is not designed to be held or driven with an inserted drivers. a locking feature may be incorporated in the design of the head or threads. for items with a thread diameter smaller than no. 10 (0.190 in.) (5 mm) and those items with an inserted drive head, use screw, shoulder. for items which are no. 10 (0.190 in.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use bolt, externally relieved body. excludes thumbscrew.
