Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 12E40316-7 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.500in. ⁓1/2"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
1.125in. ⁓1-1/8"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
hexagon
A measurement from the bottom to the top of the head,in distinction from depth.
0.125in. ⁓1/8"
0.620in.
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.500in. ⁓1/2"
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
20
The physical configuration of the unthreaded portion of a body adjacent to the head which is larger than the diameter of the shank.
round first shoulder
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-S-225/6-T4 fed spec single material response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unf
Answers.
Unf
Steel
20
Hexagon
0.500 inches
Right-hand
2a
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5306 ⁓ Bolts
NSN 5306-00-110-5618 BOLT,SHOULDER
unf thread series 20 thread quantity per inch hexagon head style 0.500" thread length right-hand 2a thread class
- NIIN
- 001105618
- NIIN Date
- 08/09/68
- Schedule B
- 7318152000
- Name Code
- 04905
- FIIG
- A003B0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- --
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Availability for 12E40316-7 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
- Commodity (for shipments via water)
- Bolts or nuts (iron or steel),(less than 35 feet)
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other bolts with similar characteristics
Nothing similar to this part number was found in our inventory
12E40316-7 / Bolt,shoulderWhat is the formal definition of this item?
An externally threaded fastener whose threaded portion is of one nominal diameter, no. 10 (0.190 in.) (5 mm) or larger. it has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. the head is not designed to be held or driven with an inserted drivers. a locking feature may be incorporated in the design of the head or threads. for items with a thread diameter smaller than no. 10 (0.190 in.) (5 mm) and those items with an inserted drive head, use screw, shoulder. for items which are no. 10 (0.190 in.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use bolt, externally relieved body. excludes thumbscrew.
