Serving our customers with quality and safety first.
3a
RIGHT-Hand
0.455in. and 0.505in. ⁓33/64"
2.027in. and 2.057in. ⁓2-1/16"
double hexagon w/hole
0.338in. and 0.358in. ⁓23/64"
0.367in. and 0.376in.
0.521in. and 0.531in.
0.072in. and 0.092in.
0.050in. and 0.060in. ⁓1/16"
0.3110in. and 0.3120in.
0.312in. ⁓5/16"
1.552in. and 1.572in.
4
drilled
24
220000 pounds per square inch
46.0 rockwell c and 50.0 rockwell c
double hexagon longitudinal hole
steel comp H11
ams 6485 assn std single material response
cadmium
nas 672 assn std single treatment response
unjf
1EA
Unjf
Steel comp h11
24
1.552 inches minimum and 1.572 inches maximum
0.050 inches minimum and 0.060 inches maximum
Double hexagon w/hole
0.455 inches minimum and 0.505 inches maximum
Right-hand
3a
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5306 ⁓ Bolts
unjf thread series cadmium surface treated 24 thread quantity per inch 1.552" grip length 0.050" hole diameter double hexagon w/hole head style 0.455" thread length right-hand 3a thread class
1. | AIC220EL-5H25 | Cage 06725 |
2. | LWB22-5H25 | Cage 80539 |
3. | LWB22-5H25 | Cage 56878 |
4. | C083-5H25 | Cage 56878 |
5. | C083-5H25 | Cage 92215 |
6. | C083-5H25 | Cage 81755 |
Nothing similar to this part number was found in our inventory
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. the head is designed to accommodate an external wrench or driver. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. the unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. a locking feature may be incorporated in the design of the head or threads. see bolt, machine and bolt, clevis.