Serving our customers with quality and safety first.
3a
RIGHT-Hand
0.902in. ⁓29/32"
2.762in. and 2.792in. ⁓2-51/64"
hexagon
0.312in. and 0.327in. ⁓21/64"
0.928in. and 0.940in.
0.6230in. and 0.6240in.
0.141in. and 0.151in. all holes
0.6250in. ⁓5/8"
1.865in. and 1.885in.
18
160000 pounds per square inch
2.528in. all holes
bolt, tension, hex head, close tolerance, A286 cres, long thread, reduced major thread dia., SELF-Locking and nonlocking, 160 ksi ftu
steel
AMS5781, 5732, 5737 or ams 5853 assn std single material response
cadmium
AMS-QQ-P-416, type ii, class 2 assn std single treatment response
unjf
Unjf
Steel
18
1.865 inches minimum and 1.885 inches maximum
Hexagon
0.902 inches
Right-hand
3a
Schedule B number: 7318152000
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5306 ⁓ Bolts
unjf thread series cadmium surface treated bolt, tension, hex head, close tolerance, A286 cres, long thread, reduced major thread dia., self-locking 18 thread quantity per inch 1.865" grip length hexagon head style 0.902" thread length right-hand 3a thread class
Nothing similar to this part number was found in our inventory
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. the head is designed to accommodate an external wrench or driver. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. the unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. a locking feature may be incorporated in the design of the head or threads. see bolt, machine and bolt, clevis.