Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. NAS630H98 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.873in. ⁓7/8"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
6.983in. and 7.013in. ⁓7-1/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
double hexagon extended washer
A measurement from the bottom to the top of the head,in distinction from depth.
0.608in. and 0.628in. ⁓41/64"
0.682in. and 0.691in.
1.04in. and 1.05in.
0.14in. and 0.16in.
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
0.05in. and 0.06in. ⁓1/16"
The length of a straight line which passes through the center of the grip,and terminates at the circumference.
0.6230in. and 0.6240in.
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.6250in. ⁓5/8"
A measurement of the longest dimension of the grip,in distinction from width.
6.115in. and 6.135in.
The number of holes provided.
4
Indicates the type of hole(s) provided in the item.
drilled
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
18
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
180000 pounds per square inch
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
39.0 rockwell c and 43.0 rockwell c
The style designation that most nearly corresponds to the appearance of the hole configuration.
round longitudinal hole
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
BOLT-Twelve point external WRENCHING-180, 000 psi
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 4140 or steel comp 4340 or steel comp 8740
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
AMS6382 national std/spec 1st material response or AMS6415 national std/spec 2nd material response or AMS6322 national std/spec 3rd material response
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
NAS672 national std/spec single treatment response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjf
The document designator of the specification or standard which established the item of supply.
80205-NAS624 thru 644 professional/industrial association standard
Answers.
Unjf
Steel comp 4140 or steel comp 4340 or steel comp 8740
18
6.115 inches minimum and 6.135 inches maximum
0.05 inches minimum and 0.06 inches maximum
Double hexagon extended washer
0.873 inches
Right-hand
3a
Schedule B number: 7318152000
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5306 ⁓ Bolts
NSN 5306-01-623-0484 BOLT,SHEAR
unjf thread series cadmium surface treated bolt-twelve point external wrenching-180, 000 psi 18 thread quantity per inch 6.115" grip length 0.05" hole diameter double hexagon extended washer head style 0.873" thread length right-hand 3a thread class
- NIIN
- 016230484
- NIIN Date
- 10/30/13
- Schedule B
- 7318152000
- Name Code
- 15903
- FIIG
- A003B0
- DEMIL / ITAR
- Uncontrolled item (Code )
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- --
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Australia
Availability for NAS630H98 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other bolts with similar characteristics
Nothing similar to this part number was found in our inventory
NAS630H98 / Bolt,shearWhat is the formal definition of this item?
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. the head is designed to accommodate an external wrench or driver. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. the unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. a locking feature may be incorporated in the design of the head or threads. see bolt, machine and bolt, clevis.
