NAS630H-104

NAS630H104 Shear Bolt

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. NAS630H-104 specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

3a

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

0.873in. ⁓7/8"

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

7.373in. ⁓7-3/8"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

double hexagon extended washer

Head Height
A measurement from the bottom to the top of the head,in distinction from depth.

0.618in. ⁓5/8"

Width Between Flats

0.688in.

Extended Washer Diameter

1.045in.

Extended Washer Thickness

0.150in.

Hole Diameter
The length of a straight line which passes through the center of a hole,and terminates at the circumference.

0.055in. ⁓1/16"

Grip Diameter
The length of a straight line which passes through the center of the grip,and terminates at the circumference.

0.623in. and 0.624in.

Single Shear Strength
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard single shear test method.

33150 pounds per square inch

Nominal Thread Diameter
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.

0.625in. ⁓5/8"

Grip Length
A measurement of the longest dimension of the grip,in distinction from width.

6.500in.

Hole Quantity
The number of holes provided.

4

Hole Type
Indicates the type of hole(s) provided in the item.

drilled

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

18

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

49050 pounds per square inch

Hardness Rating
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.

39.0 rockwell c and 43.0 rockwell c

Hole Configuration Style
The style designation that most nearly corresponds to the appearance of the hole configuration.

double hexagon longitudinal hole

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 4140 or steel comp 4340 or steel comp 8740

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

ams 6382 assn std single material response or ams 6415 assn std single material response or ams 6322 assn std single material response

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unjf

Answers.

What class is the thread series?

Unjf

What material is the shear bolt made of ?

Steel comp 4140 or steel comp 4340 or steel comp 8740

What is the thread quantity per inch?

18

What is the grip length?

6.500 inches

What is the inside hole diameter?

0.055 inches

What is the head style?

Double hexagon extended washer

What is the thread length?

0.873 inches

What is the thread direction?

Right-hand

What is the thread class?

3a

What is the NSN for NAS630H-104?

5306-01-600-8357

How is this classified for shipping?

Schedule B number: 7318152000
Bolts and bolts and their nuts or washers exported in the same shipment

What's the federal classification of NAS630H-104?

FSC 5306 ⁓ Bolts

NSN 5306-01-600-8357 BOLT,SHEAR

unjf thread series cadmium surface treated 18 thread quantity per inch 6.500" grip length 0.055" hole diameter double hexagon extended washer head style 0.873" thread length right-hand 3a thread class

NIIN
016008357
NIIN Date
12/21/11
Schedule B
7318152000 
Name Code
15903
FIIG
A003B0
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Major End Users Countries and entities

  • - Australia 

Availability for NAS630H-104 A member of our team will provide you with a price and availability quote

Request a Quote »

Similar by Design Other bolts with similar characteristics

Nothing similar to this part number was found in our inventory

NAS630H-104 / Bolt,shearWhat is the formal definition of this item?

A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. the head is designed to accommodate an external wrench or driver. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. the unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. a locking feature may be incorporated in the design of the head or threads. see bolt, machine and bolt, clevis.