NAS1790-5R11D

NAS17905R11D Shear Bolt

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. NAS1790-5R11D specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

3a

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

0.469in. ⁓15/32"

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

0.376in. and 0.396in. ⁓13/32"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

flat countersunk

Head Diameter
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.

0.578in. and 0.634in.

Hole Diameter
The length of a straight line which passes through the center of a hole,and terminates at the circumference.

0.076in. and 0.086in. ⁓3/32"

Grip Diameter
The length of a straight line which passes through the center of the grip,and terminates at the circumference.

0.3110in. and 0.3120in.

Nominal Thread Diameter
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.

0.3125in. ⁓21/64"

Grip Length
A measurement of the longest dimension of the grip,in distinction from width.

0.6775in. and 0.6975in.

Hole Quantity
The number of holes provided.

1

Hole Type
Indicates the type of hole(s) provided in the item.

drilled

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

28

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

160000 pounds per square inch

Hole Configuration Style
The style designation that most nearly corresponds to the appearance of the hole configuration.

round

Countersink Angle
The included angle of the countersink.

99.0 degrees and 101.0 degrees

Part Name Assigned By Controlling Agency
The name assigned to the item by the government agency or commercial organization controlling the design of the item.

bolt, 100 deg flush head 160, 000 psi uts

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 4140 or steel comp 4340 or steel comp E4340 or steel comp 8740

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

MIL-S-5626 mil spec single material response or AMS6415 assn std 2nd material response or MIL-S-5000 mil spec 3rd material response or MIL-S-60494 mil spec 4th material response

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-416, ty ii, cl 2 fed spec single treatment response

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unjf

Answers.

What class is the thread series?

Unjf

What material is the shear bolt made of ?

Steel comp 4140 or steel comp 4340 or steel comp e4340 or steel comp 8740

What is the thread quantity per inch?

28

What is the grip length?

0.6775 inches minimum and 0.6975 inches maximum

What is the inside hole diameter?

0.076 inches minimum and 0.086 inches maximum

What is the head style?

Flat countersunk

What is the thread length?

0.469 inches

What is the thread direction?

Right-hand

What is the thread class?

3a

What is the NSN for NAS1790-5R11D?

5306-01-495-1095

How is this classified for shipping?

Schedule B number: 7318152000
Bolts and bolts and their nuts or washers exported in the same shipment

What's the federal classification of NAS1790-5R11D?

FSC 5306 ⁓ Bolts

NSN 5306-01-495-1095 BOLT,SHEAR

unjf thread series cadmium surface treated bolt, 100 deg flush head 160, 000 psi uts 28 thread quantity per inch 0.6775" grip length 0.076" hole diameter flat countersunk head style 0.469" thread length right-hand 3a thread class

NIIN
014951095
NIIN Date
03/06/02
Schedule B
7318152000 
Name Code
15903
FIIG
A003B0
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

Major End Users Countries and entities

  • - Italy 

Availability for NAS1790-5R11D A member of our team will provide you with a price and availability quote

Request a Quote »

Similar by Design Other bolts with similar characteristics

Nothing similar to this part number was found in our inventory

NAS1790-5R11D / Bolt,shearWhat is the formal definition of this item?

A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. the head is designed to accommodate an external wrench or driver. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. the unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. a locking feature may be incorporated in the design of the head or threads. see bolt, machine and bolt, clevis.