Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. MS14181-05010P specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.589in. ⁓19/32"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
1.224in. and 1.254in. ⁓1-17/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
spline extended washer
A measurement from the bottom to the top of the head,in distinction from depth.
0.302in. and 0.322in. ⁓21/64"
0.575in. and 0.585in.
0.035in. and 0.055in.
The length of a straight line which passes through the center of the grip,and terminates at the circumference.
0.3110in. and 0.3120in.
0.360in. and 0.375in.
The national stock number or the identification information of the end equipment for which the item is a part.
f/A-18E aircraft
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.3125in. ⁓21/64"
A measurement of the longest dimension of the grip,in distinction from width.
0.615in. and 0.635in.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
24
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
220000 pounds per square inch
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.
agav
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
32.0 microinches bearing surface of head
The chemical compound or mechanical mixture properties of which the item is fabricated.
nickel alloy 718
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ams 5662 assn std single material response or ams 5663 assn std single material response
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjf
Answers.
1EA
Unjf
Nickel alloy 718
24
0.615 inches minimum and 0.635 inches maximum
Spline extended washer
0.589 inches minimum
Right-hand
3a
Schedule B number: 7508900000
nmfc 093486
Other articles of nickel (excluding cloth, grill & netting of nickel wire)
FSC 5306 ⁓ Bolts
NSN 5306-01-474-0947 BOLT,SHEAR
Used on f/a-18e aircraft. unjf thread series cadmium surface treated 24 thread quantity per inch 0.615" grip length spline extended washer head style 0.589" thread length right-hand 3a thread class
- NIIN
- 014740947
- NIIN Date
- 04/25/00
- Schedule B
- 7508900000
- Name Code
- 15903
- FIIG
- A003B0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $101.55 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
- - Department of The Air Force
- - Denmark
Availability for MS14181-05010P A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Rating variable
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
- Commodity (for shipments via water)
- Bolts or nuts (iron or steel),(less than 35 feet)
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other bolts with similar characteristics
Nothing similar to this part number was found in our inventory
MS14181-05010P / Bolt,shearWhat is the formal definition of this item?
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. the head is designed to accommodate an external wrench or driver. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. the unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. a locking feature may be incorporated in the design of the head or threads. see bolt, machine and bolt, clevis.
