Serving our customers with quality and safety first.
3a
RIGHT-Hand
0.236in. ⁓1/4"
0.720in. and 0.767in. ⁓25/32"
double hexagon
0.130in. and 0.150in. ⁓5/32"
0.367in. and 0.376in.
0.1885in. and 0.1894in.
0.1900in. (UTS #10)
0.490in. and 0.510in.
32
4560 pounds per square inch
bolt, double hex head, 180 ksi shear, 900 degrees f
min double shear in lbs 10, 040; max wt lbs per 1000 wt of bolt hd and thd 6.43, wt of body per 1/16 of length 0.49
vanadium alloy
nickel and cadmium
AMS2416 assn std single treatment response
unjf
Unjf
Vanadium alloy
32
0.490 inches minimum and 0.510 inches maximum
Double hexagon
0.236 inches
Right-hand
3a
Schedule B number: 8112991000
Germanium and articles thereof, wrought, waste and scrap, powders
FSC 5306 ⁓ Bolts
unjf thread series nickel surface treated min double shear in lbs 10, 040; max wt lbs per 1000 wt of bolt hd bolt, double hex head, 180 ksi shear, 900 degrees f 32 thread quantity per inch 0.490" grip length double hexagon head style 0.236" thread length right-hand 3a thread class
1. | C078 | Cage 81755 |
2. | AIC930-3-8 | Cage 06725 |
Nothing similar to this part number was found in our inventory
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. the head is designed to accommodate an external wrench or driver. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. the unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. a locking feature may be incorporated in the design of the head or threads. see bolt, machine and bolt, clevis.