Serving our customers with quality and safety first.
3a
RIGHT-Hand
0.611in. ⁓5/8"
1.299in. ⁓1-5/16"
double hexagon w/hole
0.348in. ⁓23/64"
0.367in. and 0.376in.
0.521in. and 0.531in.
0.082in.
0.3110in. and 0.3120in.
0.312in. ⁓5/16"
0.688in.
24
180000 pounds per square inch
32.0 microinches bearing surface of head
32.0 microinches grip
hex hole in point 0.156 in. min dia, 0.158 in. max dia
steel
cadmium and chromate
QQ-P-416 type 2 class 3 fed spec single treatment response
unjf
1EA
Unjf
Steel
24
0.688 inches
Double hexagon w/hole
0.611 inches
Right-hand
3a
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5306 ⁓ Bolts
unjf thread series cadmium surface treated hex hole in point 0.156 in. min dia, 0.158 in. max dia 24 thread quantity per inch 0.688" grip length double hexagon w/hole head style 0.611" thread length right-hand 3a thread class
1. | AIC585-05-11 | Cage 06725 |
2. | 63357-05-11 | Cage 56878 |
3. | 4S2801-5-11 | Cage 92215 |
4. | C585-05-11 | Cage 81755 |
Nothing similar to this part number was found in our inventory
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. the head is designed to accommodate an external wrench or driver. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. the unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. a locking feature may be incorporated in the design of the head or threads. see bolt, machine and bolt, clevis.