Serving our customers with quality and safety first.
3a
RIGHT-Hand
0.443in. and 0.493in. ⁓1/2"
1.078in. and 1.108in. ⁓1-7/64"
double hexagon w/hole
0.290in. and 0.310in. ⁓5/16"
0.303in. and 0.325in.
0.428in. and 0.438in.
0.059in. and 0.079in.
0.150in. and 0.190in. ⁓13/64"
0.2490in. and 0.2495in.
0.250in. ⁓1/4"
0.615in. and 0.635in.
1
drilled
28
220000 pounds per square inch
double hexagon longitudinal hole
steel comp XM-13
23-112 ty a mfr ref single material response
passivate
QQ-P-35 fed spec single treatment response
unjf
1EA
Unjf
Steel comp xm-13
28
0.615 inches minimum and 0.635 inches maximum
0.150 inches minimum and 0.190 inches maximum
Double hexagon w/hole
0.443 inches minimum and 0.493 inches maximum
Right-hand
3a
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5306 ⁓ Bolts
unjf thread series passivate surface treated 28 thread quantity per inch 0.615" grip length 0.150" hole diameter double hexagon w/hole head style 0.443" thread length right-hand 3a thread class
1. | 74328-4H10 | Cage 56878 |
2. | MB84-4H10 | Cage 73197 |
3. | AIC752-4H10 | Cage 06725 |
4. | ST3M571-4H10 | Cage 06725 |
5. | ST3M571-4H10 | Cage 06710 |
6. | VAL23033-4H10 | Cage 06710 |
7. | ST3M571-4H10 | Cage 06950 |
8. | VS3060-4H10 | Cage 06950 |
9. | ST3M571-4H10 | Cage 0JV78 |
10. | ST3M571-4H10 | Cage 0ZC92 |
11. | S371-4H10 | Cage 17446 |
12. | ST3M571-4H10 | Cage 17446 |
13. | ST3M571-4H10 | Cage 27624 |
14. | ST3M571-4H10 | Cage 57928 |
15. | ST3M571-4H10 | Cage 58998 |
16. | ST3M571-4H10 | Cage 56878 |
17. | S11-1059-4H10 | Cage 57928 |
18. | ST3M571-4H10 | Cage 73197 |
19. | MB84-4H10 | Cage L4528 |
20. | ST3M571-4H10 | Cage L4528 |
21. | ST3M571-4H10 | Cage 76301 |
22. | ST3M571-4H10 | Cage 0PTK6 |
23. | S371-4H10 | Cage 97928 |
24. | VS3060-4H10 | Cage 92215 |
Nothing similar to this part number was found in our inventory
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. the head is designed to accommodate an external wrench or driver. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. the unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. a locking feature may be incorporated in the design of the head or threads. see bolt, machine and bolt, clevis.