BM3315-6-28

BM3315628 Shear Bolt

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. BM3315-6-28 specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

3a

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

0.535in. and 0.585in. ⁓19/32"

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

2.295in. and 2.325in. ⁓2-21/64"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

double hexagon w/hole

Head Height
A measurement from the bottom to the top of the head,in distinction from depth.

0.378in. and 0.398in. ⁓13/32"

Width Between Flats

0.430in. and 0.439in.

Extended Washer Diameter

0.639in. and 0.649in.

Extended Washer Thickness

0.081in. and 0.101in.

Grip Diameter
The length of a straight line which passes through the center of the grip,and terminates at the circumference.

0.3735in. and 0.3745in.

Nominal Thread Diameter
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.

0.375in. ⁓3/8"

Grip Length
A measurement of the longest dimension of the grip,in distinction from width.

1.740in. and 1.760in.

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

24

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

220000 pounds per square inch

Hardness Rating
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.

46.0 rockwell c and 50.0 rockwell c

Part Name Assigned By Controlling Agency
The name assigned to the item by the government agency or commercial organization controlling the design of the item.

navy special project

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp H11

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

ams 6485 assn std single material response or AMS6487 assn std single material response

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

nas 672 assn std single treatment response

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unjf

Answers.

What class is the thread series?

Unjf

What material is the shear bolt made of ?

Steel comp h11

What is the thread quantity per inch?

24

What is the grip length?

1.740 inches minimum and 1.760 inches maximum

What is the head style?

Double hexagon w/hole

What is the thread length?

0.535 inches minimum and 0.585 inches maximum

What is the thread direction?

Right-hand

What is the thread class?

3a

What is the NSN for BM3315-6-28?

5306-00-469-3618

How is this classified for shipping?

Schedule B number: 7318152000
Bolts and bolts and their nuts or washers exported in the same shipment

What's the federal classification of BM3315-6-28?

FSC 5306 ⁓ Bolts

NSN 5306-00-469-3618 BOLT,SHEAR

unjf thread series cadmium surface treated navy special project 24 thread quantity per inch 1.740" grip length double hexagon w/hole head style 0.535" thread length right-hand 3a thread class

NIIN
004693618
NIIN Date
06/10/71
Schedule B
7318152000 
Name Code
15903
FIIG
A003B0
QUP
 
Historical Price
$97.53 EA
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
Metal content unknown
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

1. LWB22-6-28 Cage 80539
2. LWB22-6-28 Cage 56878
3. C083-6-28 Cage 81755

Major End Users Countries and entities

  • - Department of The Navy 

Availability for BM3315-6-28 A member of our team will provide you with a price and availability quote

Request a Quote »

Similar by Design Other bolts with similar characteristics

Nothing similar to this part number was found in our inventory

BM3315-6-28 / Bolt,shearWhat is the formal definition of this item?

A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. the head is designed to accommodate an external wrench or driver. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. the unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. a locking feature may be incorporated in the design of the head or threads. see bolt, machine and bolt, clevis.