Serving our customers with quality and safety first.
RIGHT-Hand
21.5 mm and 22.5 mm
61.75 mm and 62.25 mm
hexagon
6.82 mm and 7.18 mm
16.73 mm and 17.00 mm
9.985 mm and 10.000 mm
10.0 mm
39.75 mm and 40.25 mm
1100 megapascals
1.5
6g
navy special project
iron alloy 660
ams 5732 assn std single material response or ams 5737 assn std single material response
passivate
QQ-P-35 fed spec single treatment response
m
1EA
M
Iron alloy 660
39.75 millimeters minimum and 40.25 millimeters maximum
Hexagon
21.5 millimeters minimum and 22.5 millimeters maximum
Right-hand
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5306 ⁓ Bolts
m thread series passivate surface treated navy special project 39.75mm grip length hexagon head style 21.5mm thread length right-hand
1. | 74597-M1015-40 | Cage 56878 |
2. | VS3078-10-40 | Cage 92215 |
3. | 74597-M1015-40 | Cage 80539 |
4. | 74597-M1015-40 | Cage 56878 |
5. | 74597-M1015-40 | Cage 80539 |
6. | VS3078-10-40 | Cage 92215 |
Nothing similar to this part number was found in our inventory
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. the head is designed to accommodate an external wrench or driver. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. the unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. a locking feature may be incorporated in the design of the head or threads. see bolt, machine and bolt, clevis.