Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. AN5-6A specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.5312in. ⁓35/64"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
1.000in. and 1.079in. ⁓1-3/32"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
hexagon
The length of a straight line which passes through the center of the grip,and terminates at the circumference.
0.309in. and 0.312in.
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard single shear test method.
5750 pounds per square inch
A measurement of the longest dimension of the grip,in distinction from width.
0.296in. and 0.328in.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
24
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
6500 pounds per square inch
The stress at which a material exhibits a specified limiting deviation from the proportionality of stress or strain.
4980 pounds per square inch
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
NON-Corrosion resistant steel
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unf
Answers.
1HD
Unf
24
0.296 inches minimum and 0.328 inches maximum
Hexagon
0.5312 inches
Right-hand
3a
FSC 5306 ⁓ Bolts
NSN 5306-00-150-9101 BOLT,SHEAR
unf thread series non-corrosion resistant steel 24 thread quantity per inch 0.296" grip length hexagon head style 0.5312" thread length right-hand 3a thread class
- NIIN
- 001509101
- NIIN Date
- 07/30/97
- Schedule B
- Name Code
- 15903
- FIIG
- A003B0
- Item Weight
- 2.800lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $46.00 HD
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 5306001509101 | Cage SCY13 |
Major End Users Countries and entities
- - Department of The Army
- - Department of The Navy
- - Department of The Air Force
- - U.s. Marine Corps
- - U.s. Coast Guard
- - Austria
- - Slovenia
- - Poland
- - Bulgaria
- - Brazil
- - Spain
- - Singapore
- - Morocco
- - Malaysia
- - Australia
- - Belgium
- - France
- - Germany
- - Republic of Korea
- - Netherlands
- - Portugal
- - Italy
- - Denmark
- - Greece
- - Turkey
- - Nato Maintenance And Supply Agency
Availability for AN5-6A A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Bolts or nuts (iron or steel),(less than 35 feet)
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other bolts with similar characteristics
Nothing similar to this part number was found in our inventory
AN5-6A / Bolt,shearWhat is the formal definition of this item?
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. the head is designed to accommodate an external wrench or driver. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. the unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. a locking feature may be incorporated in the design of the head or threads. see bolt, machine and bolt, clevis.
