Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 578668-1 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.522in. and 0.532in. ⁓35/64"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
2.432in. ⁓2-7/16"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
hexagon
A measurement from the bottom to the top of the head,in distinction from depth.
0.300in. ⁓5/16"
0.875in.
The length of a straight line which passes through the center of the grip,and terminates at the circumference.
0.5618in. and 0.5623in.
The length of a straight line which passes through the center of the shank unthreaded hole,and terminates at the inside circumference.
0.141in. first hole
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.562in. ⁓9/16"
A measurement of the longest dimension of the grip,in distinction from width.
0.907in. and 0.910in.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
18
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
2600000 pounds per square inch
The distance from the shank hole centerline to the largest bearing surface of the head.
2.195in. first hole
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp E4340
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-S-5000 mil spec single material response
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
chromium grip
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
enamel head
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
epoxy resin primer assn std single treatment response head
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MIL-P-6871 ty 2 mil spec single treatment response grip
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unf
Answers.
1EA
Unf
Steel comp e4340
18
0.907 inches minimum and 0.910 inches maximum
Hexagon
0.522 inches minimum and 0.532 inches maximum
Right-hand
3a
Schedule B number: 7318152000
nmfc 093470
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5306 ⁓ Bolts
NSN 5306-00-589-9234 BOLT,SHEAR
unf thread series enamel head surface treated 18 thread quantity per inch 0.907" grip length hexagon head style 0.522" thread length right-hand 3a thread class
- NIIN
- 005899234
- NIIN Date
- 01/01/63
- Schedule B
- 7318152000
- Name Code
- 15903
- FIIG
- A003B0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $111.58 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Air Force
Availability for 578668-1 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 70.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Bolts or nuts (iron or steel),(less than 35 feet)
- NMFC (national motor freight code)
- 093470 BOLTS/NUTS I/S
- UFC (universal freight code)
- 48940
Similar by Design Other bolts with similar characteristics
Nothing similar to this part number was found in our inventory
578668-1 / Bolt,shearWhat is the formal definition of this item?
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. the head is designed to accommodate an external wrench or driver. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. the unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. a locking feature may be incorporated in the design of the head or threads. see bolt, machine and bolt, clevis.
