Serving our customers with quality and safety first.
3a
RIGHT-Hand
1.036in. ⁓1-3/64"
1.681in. ⁓1-11/16"
double hexagon extended washer
0.711in. ⁓23/32"
0.812in.
1.220in. and 1.230in.
0.178in.
0.045in. and 0.060in. ⁓1/16"
0.797in. and 0.812in.
0.750in. ⁓3/4"
0.615in. and 0.635in.
4
drilled
16
180000 pounds per square inch
double hexagon longitudinal hole
steel comp 4140
MIL-S-5626 4140 mil spec single material response
phosphate zinc
MIL-STD-171 5.1.1 mil std single treatment response
unf
1EA
Unf
Steel comp 4140
16
0.615 inches minimum and 0.635 inches maximum
0.045 inches minimum and 0.060 inches maximum
Double hexagon extended washer
1.036 inches
Right-hand
3a
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5306 ⁓ Bolts
unf thread series phosphate zinc surface treated 16 thread quantity per inch 0.615" grip length 0.045" hole diameter double hexagon extended washer head style 1.036" thread length right-hand 3a thread class
Nothing similar to this part number was found in our inventory
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. the head is designed to accommodate an external wrench or driver. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. the unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. a locking feature may be incorporated in the design of the head or threads. see bolt, machine and bolt, clevis.