Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. X5101-74-1 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.125in. ⁓1/8"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.156in. ⁓5/32"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
headless (setscrew)
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.
0.038in.
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.
0.050in.
0.017in.
A measurement of the longest dimension of the point,in distinction from width.
0.022in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the point.
flat
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
four spline
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.086in. (UTS #2)
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
64
90.0 degrees
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 303
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
aisi assn std single material response
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unf
Answers.
Unf
Steel comp 303
64
Headless (setscrew)
0.125 inches
Right-hand
3a
Schedule B number: 7318152000
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
NSN 5305-01-020-5240 SETSCREW
unf thread series passivate surface treated 64 thread quantity per inch headless (setscrew) head style 0.125" thread length right-hand 3a thread class
- NIIN
- 010205240
- NIIN Date
- 04/30/76
- Schedule B
- 7318152000
- Name Code
- 06672
- FIIG
- A003B0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Brazil
Availability for X5101-74-1 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other setscrews with similar characteristics
Nothing similar to this part number was found in our inventory
X5101-74-1 / SetscrewWhat is the formal definition of this item?
An externally threaded device whose threaded portion is of one nominal diameter with or without a head and having a cup, cone, or other type of machined point designed to prevent or restrict relative movement of parts and designed to be driven with either a wrench or inserted driver. a locking feature may be incorporated in the design of the head or threads.
