Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. V22-09 specification
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.390in. ⁓25/64"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
1.433in. ⁓1-7/16"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
round w/wrench flats
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
0.553in.
A measurement from the bottom to the top of the head,in distinction from depth.
0.632in. ⁓41/64"
1.433in.
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
0.160in. ⁓11/64"
The length of a straight line which passes through the center of a circular point,and terminates at the circumference.
0.175in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the point.
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
w/o internal drive
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
6.0 mm
The number of holes provided.
1
Indicates the type of hole(s) provided in the item.
drilled
The minimum and maximum pitch diameter limits of a nonstandard straight screw thread.
+5.8/+6.0 mm
A measurement of distance between corresponding points on two adjacent threads measured parallel to the thread axis,expressed in millimeters.
1.0
The style designation that most nearly corresponds to the appearance of the hole configuration.
round longitudinal hole
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
chromate
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
m
Answers.
1EA
M
Steel
0.160 inches
Round w/wrench flats
0.390 inches
Right-hand
Schedule B number: 7318152000
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
NSN 5305-01-390-3743 SETSCREW
m thread series chromate surface treated 0.160" hole diameter round w/wrench flats head style 0.390" thread length right-hand
- NIIN
- 013903743
- NIIN Date
- 05/18/94
- Schedule B
- 7318152000
- Name Code
- 06672
- FIIG
- A003B0
- QUP
- 1
- Historical Price
- $156.50 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - U.s. Coast Guard
Availability for V22-09 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other setscrews with similar characteristics
Nothing similar to this part number was found in our inventory
V22-09 / SetscrewWhat is the formal definition of this item?
An externally threaded device whose threaded portion is of one nominal diameter with or without a head and having a cup, cone, or other type of machined point designed to prevent or restrict relative movement of parts and designed to be driven with either a wrench or inserted driver. a locking feature may be incorporated in the design of the head or threads.
