Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. K660704-11 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.490in. and 0.510in. ⁓33/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
hexagon
A measurement from the bottom to the top of the head,in distinction from depth.
0.190in. and 0.210in. ⁓7/32"
0.365in. and 0.385in.
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
0.033in. and 0.053in. ⁓1/16"
A measurement of the longest dimension of the point,in distinction from width.
0.240in. and 0.260in.
The length of a straight line which passes through the center of a circular point,and terminates at the circumference.
0.195in. and 0.198in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the point.
flat
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
slot
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.250in. ⁓1/4"
The number of holes provided.
1
Indicates the type of hole(s) provided in the item.
drilled
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
28
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
100000 pounds per square inch
The style designation that most nearly corresponds to the appearance of the hole configuration.
double hexagon flats
90.0 degrees
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
navy special project
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 4130
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-S-6758 mil spec single material response
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
chromate and cadmium
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-416, cl 1, ty 2 fed spec single treatment response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unf
Answers.
1EA
Unf
Steel comp 4130
28
0.033 inches minimum and 0.053 inches maximum
Hexagon
Right-hand
3a
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
NSN 5305-01-184-5928 SETSCREW
unf thread series chromate surface treated navy special project 28 thread quantity per inch 0.033" hole diameter hexagon head style right-hand 3a thread class
- NIIN
- 011845928
- NIIN Date
- 07/20/84
- Schedule B
- 7318152000
- Name Code
- 06672
- FIIG
- A003B0
- QUP
- 1
- Historical Price
- $2,489.55 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
Availability for K660704-11 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other setscrews with similar characteristics
Nothing similar to this part number was found in our inventory
K660704-11 / SetscrewWhat is the formal definition of this item?
An externally threaded device whose threaded portion is of one nominal diameter with or without a head and having a cup, cone, or other type of machined point designed to prevent or restrict relative movement of parts and designed to be driven with either a wrench or inserted driver. a locking feature may be incorporated in the design of the head or threads.
