6011597

6011597 Setscrew

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. 6011597 specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

3a

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

0.580in. ⁓19/32"

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

0.750in. ⁓3/4"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

headless (setscrew)

Point Diameter
The length of a straight line which passes through the center of a circular point,and terminates at the circumference.

0.235in. and 0.250in.

Point Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the point.

cup

Internal Drive Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.

hexagon

End Item Identification
The national stock number or the identification information of the end equipment for which the item is a part.

1351-01-531-3389

Nominal Thread Diameter
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.

0.500in. ⁓1/2"

Width Across Flats
The shortest straight line between flats,perpendicular to the height.

0.250in. ⁓1/4"

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

20

Point Chamfer Angle

118.0 degrees

Part Name Assigned By Controlling Agency
The name assigned to the item by the government agency or commercial organization controlling the design of the item.

setscrew, hex socket, cup point, alloy steel, cadmium plate, UNF-3A

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

alloy steel, cadmium plating per MS51964; hex socket end is reduced to 0.432/0.438 inch dia, 0.170 inch in lgt

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

MS51964 mil spec single material response

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unf

Answers.

What class is the thread series?

Unf

What material is the setscrew made of ?

Steel

What is the thread quantity per inch?

20

What is the head style?

Headless (setscrew)

What is the thread length?

0.580 inches

What is the thread direction?

Right-hand

What is the thread class?

3a

What is the NSN for 6011597?

5305-01-546-6692

How is this classified for shipping?

Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment

What's the federal classification of 6011597?

FSC 5305 ⁓ Screws

NSN 5305-01-546-6692 SETSCREW

Used on 1351-01-531-3389. unf thread series cadmium surface treated alloy steel, cadmium plating per MS51964; hex socket end is reduced to 0.432/0.438 inch dia, 0.170 inch in lgt setscrew, hex socket, cup point, alloy steel, cadmium plate, unf-3a 20 thread quantity per inch headless (setscrew) head style 0.580" thread length right-hand 3a thread class

NIIN
015466692
NIIN Date
12/26/06
Schedule B
7318152000 
Name Code
06672
FIIG
A003B0
QUP
 
Historical Price
$14.38 EA
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Major End Users Countries and entities

  • - Department of The Navy 

Availability for 6011597 A member of our team will provide you with a price and availability quote

Request a Quote »

Shipping Information

Special Handling
Other or no special handling required (sh) 
LTL (less than a truck load rating)
Rating variable 
LCL (less than a car load rating)
Unknown
Special Cargo
No special type of cargo code applicable 
Air Freight (Minimum cargo door size required)
Shipment is not a consolidation and does not exceed 84 inches in any dimension. 
Customs Requirement Classification
Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater 
Commodity (for shipments via water)
Metal hardware 
NMFC (national motor freight code)
093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3) 
UFC (universal freight code)
48950 

Similar by Design Other setscrews with similar characteristics

Nothing similar to this part number was found in our inventory

6011597 / SetscrewWhat is the formal definition of this item?

An externally threaded device whose threaded portion is of one nominal diameter with or without a head and having a cup, cone, or other type of machined point designed to prevent or restrict relative movement of parts and designed to be driven with either a wrench or inserted driver. a locking feature may be incorporated in the design of the head or threads.