Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 450-26 specification
Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a
Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.235in. and 0.255in. ⁓17/64"
Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.984in. and 1.016in. ⁓1-1/64"
Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
double chamfer
Head Diameter
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
0.359in. and 0.391in.
Head Height
A measurement from the bottom to the top of the head,in distinction from depth.
A measurement from the bottom to the top of the head,in distinction from depth.
0.422in. and 0.454in. ⁓15/32"
Point Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the point.
The style designation indicating the configuration that most nearly corresponds to the appearance of the point.
cone
Internal Drive Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
slot
Nominal Thread Diameter
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.190in. (UTS #10)
Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
32
Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
color black
Material
The chemical compound or mechanical mixture properties of which the item is fabricated.
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 303
Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
astm AS82 assn std single material response
Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
oxide
Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MIL-C-13924 mil spec 15th treatment response
Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unf
Answers.
What quantity is this sold in?
1EA
What class is the thread series?
Unf
What material is the setscrew made of ?
Steel comp 303
What is the thread quantity per inch?
32
What is the head style?
Double chamfer
What is the thread length?
0.235 inches minimum and 0.255 inches maximum
What is the thread direction?
Right-hand
What is the thread class?
2a
How is this classified for shipping?
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
What's the federal classification of 450-26?
FSC 5305 ⁓ Screws
NSN 5305-01-199-2138 SETSCREW
unf thread series oxide surface treated color black 32 thread quantity per inch double chamfer head style 0.235" thread length right-hand 2a thread class
- NIIN
- 011992138
- NIIN Date
- 01/18/85
- Schedule B
- 7318152000
- Name Code
- 06672
- FIIG
- A003B0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $123.55 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | SM-A-744408-32 | Cage 80063 |
Major End Users Countries and entities
- - Defense Logistics Agency
Availability for 450-26 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other setscrews with similar characteristics
Nothing similar to this part number was found in our inventory
450-26 / SetscrewWhat is the formal definition of this item?
An externally threaded device whose threaded portion is of one nominal diameter with or without a head and having a cup, cone, or other type of machined point designed to prevent or restrict relative movement of parts and designed to be driven with either a wrench or inserted driver. a locking feature may be incorporated in the design of the head or threads.
