Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 27850 specification
Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a
Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.151in. and 0.161in. ⁓11/64"
Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.303in. and 0.323in. ⁓21/64"
Point Length
A measurement of the longest dimension of the point,in distinction from width.
A measurement of the longest dimension of the point,in distinction from width.
0.142in. and 0.172in.
Point Diameter
The length of a straight line which passes through the center of a circular point,and terminates at the circumference.
The length of a straight line which passes through the center of a circular point,and terminates at the circumference.
0.427in. and 0.447in.
Point Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the point.
The style designation indicating the configuration that most nearly corresponds to the appearance of the point.
chamfer dog
Nominal Thread Diameter
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.562in. ⁓9/16"
Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
18
Point Chamfer Angle
45.0 degrees
Part Name Assigned By Controlling Agency
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
navy special project
Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
point end slotted
Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unf
Answers.
What class is the thread series?
Unf
What is the thread quantity per inch?
18
What is the thread length?
0.151 inches minimum and 0.161 inches maximum
What is the thread direction?
Right-hand
What is the thread class?
2a
What's the federal classification of 27850?
FSC 5305 ⁓ Screws
NSN 5305-00-465-2747 SETSCREW
unf thread series point end slotted navy special project 18 thread quantity per inch 0.151" thread length right-hand 2a thread class
- NIIN
- 004652747
- NIIN Date
- 01/23/70
- Schedule B
- Name Code
- 06672
- FIIG
- A003B0
- QUP
- Historical Price
- $20.88 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 25415 | Cage 45225 |
Major End Users Countries and entities
- - Department of The Navy
Availability for 27850 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other setscrews with similar characteristics
Nothing similar to this part number was found in our inventory
27850 / SetscrewWhat is the formal definition of this item?
An externally threaded device whose threaded portion is of one nominal diameter with or without a head and having a cup, cone, or other type of machined point designed to prevent or restrict relative movement of parts and designed to be driven with either a wrench or inserted driver. a locking feature may be incorporated in the design of the head or threads.
