Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 16 067 DA specification
Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
1.469in. ⁓1-15/32"
Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
1.469in. ⁓1-15/32"
Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
headless (setscrew)
Point Length
A measurement of the longest dimension of the point,in distinction from width.
A measurement of the longest dimension of the point,in distinction from width.
0.371in.
Point Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the point.
The style designation indicating the configuration that most nearly corresponds to the appearance of the point.
oval
Internal Drive Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
cross recess type 1
End Item Identification
The national stock number or the identification information of the end equipment for which the item is a part.
The national stock number or the identification information of the end equipment for which the item is a part.
mrap
Nominal Thread Diameter
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.375in. ⁓3/8"
Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
24
Hardness Rating
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
57.0 rockwell c point and 63.0 rockwell c point
Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
point undercut to 0.318 in. dia, 0.200 in. lg
Material
The chemical compound or mechanical mixture properties of which the item is fabricated.
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 1141
Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
aisi assn std single material response
Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unf
Answers.
What quantity is this sold in?
1EA
What class is the thread series?
Unf
What material is the setscrew made of ?
Steel comp 1141
What is the thread quantity per inch?
24
What is the head style?
Headless (setscrew)
What is the thread length?
1.469 inches maximum
What is the thread direction?
Right-hand
What is the thread class?
3a
How is this classified for shipping?
Schedule B number: 8710000090
nmfc 093486
Parts of armored fighting vehicles,motorized, whether or not fitted with weapons
What's the federal classification of 16 067 DA?
FSC 5305 ⁓ Screws
NSN 5305-00-356-4117 SETSCREW
Used on MRAP. unf thread series point undercut to 0.318 in. dia, 0.200 in. lg 24 thread quantity per inch headless (setscrew) head style 1.469" thread length right-hand 3a thread class
- NIIN
- 003564117
- NIIN Date
- 01/01/63
- Schedule B
- 8710000090
- Name Code
- 06672
- FIIG
- A003B0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $16.90 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 47025 | Cage 13841 |
| 2. | 7373514 | Cage 19207 |
| 3. | 16067DA | Cage 29930 |
| 4. | 16067-DA | Cage 338X5 |
| 5. | 1N16067DA | Cage 23382 |
| 6. | 204K458 | Cage 66821 |
| 7. | 204K458 | Cage 83299 |
| 8. | 3197 | Cage 92679 |
| 9. | 3804 | Cage 92679 |
| 10. | X4980-3 | Cage 92679 |
| 11. | FCC751 | Cage 92679 |
| 12. | FTC3420 | Cage 92679 |
| 13. | LMT664 | Cage 92679 |
| 14. | PEC127 | Cage 92679 |
| 15. | SD220 | Cage 92679 |
| 16. | SD240 | Cage 92679 |
| 17. | 16067DA | Cage 44185 |
| 18. | 16067DA | Cage 31007 |
Major End Users Countries and entities
- - Department of The Army
- - Department of The Navy
- - U.s. Marine Corps
- - Department of The Air Force
- - Spain
- - Singapore
- - Australia
- - New Zealand
- - France
- - Republic of Korea
- - Greece
Availability for 16 067 DA A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other setscrews with similar characteristics
Nothing similar to this part number was found in our inventory
16 067 DA / SetscrewWhat is the formal definition of this item?
An externally threaded device whose threaded portion is of one nominal diameter with or without a head and having a cup, cone, or other type of machined point designed to prevent or restrict relative movement of parts and designed to be driven with either a wrench or inserted driver. a locking feature may be incorporated in the design of the head or threads.
