Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 03272200 specification
Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
25.0 mm
Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
25.0 mm
Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
headless (setscrew)
Hole Diameter
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
1.80 mm
Point Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the point.
The style designation indicating the configuration that most nearly corresponds to the appearance of the point.
flat
Internal Drive Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
hexagon
Nominal Thread Diameter
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
8.0 mm
Width Across Flats
The shortest straight line between flats,perpendicular to the height.
The shortest straight line between flats,perpendicular to the height.
4.0 mm
Hole Quantity
The number of holes provided.
The number of holes provided.
2
Hole Type
Indicates the type of hole(s) provided in the item.
Indicates the type of hole(s) provided in the item.
drilled
Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
142230 pounds per square inch
Hardness Rating
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
27.0 rockwell c and 38.0 rockwell c
Thread Pitch In Millimeters
A measurement of distance between corresponding points on two adjacent threads measured parallel to the thread axis,expressed in millimeters.
A measurement of distance between corresponding points on two adjacent threads measured parallel to the thread axis,expressed in millimeters.
1.25
Hole Configuration Style
The style designation that most nearly corresponds to the appearance of the hole configuration.
The style designation that most nearly corresponds to the appearance of the hole configuration.
round internal hexagon
Material
The chemical compound or mechanical mixture properties of which the item is fabricated.
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel
Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
din 267 class 10.9 national spec single material response
Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
m
Answers.
What class is the thread series?
M
What material is the setscrew made of ?
Steel
What is the inside hole diameter?
1.80 millimeters
What is the head style?
Headless (setscrew)
What is the thread length?
25.0 millimeters
What is the thread direction?
Right-hand
How is this classified for shipping?
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
What's the federal classification of 03272200?
FSC 5305 ⁓ Screws
NSN 5305-01-102-5508 SETSCREW
m thread series 1.80mm hole diameter headless (setscrew) head style 25.0mm thread length right-hand
- NIIN
- 011025508
- NIIN Date
- 10/22/80
- Schedule B
- 7318152000
- Name Code
- 06672
- FIIG
- A003B0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- Historical Price
- $61.33 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 82202 | Cage 16004 |
Major End Users Countries and entities
- - Department of The Air Force
- - Brazil
Availability for 03272200 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other setscrews with similar characteristics
Nothing similar to this part number was found in our inventory
03272200 / SetscrewWhat is the formal definition of this item?
An externally threaded device whose threaded portion is of one nominal diameter with or without a head and having a cup, cone, or other type of machined point designed to prevent or restrict relative movement of parts and designed to be driven with either a wrench or inserted driver. a locking feature may be incorporated in the design of the head or threads.
