Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 92364A160 specification
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
1.500in. ⁓1-1/2"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
pan
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
0.270in.
A measurement from the bottom to the top of the head,in distinction from depth.
0.097in. ⁓7/64"
The length of the pilot,which is the unthreaded portion beyond the thread used to guide the item.
0.016in. and 0.266in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the point.
SELF-Drilling
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
cross recess type ii
The national stock number or the identification information of the end equipment for which the item is a part.
mk 105 power supply PTU-18/m
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
410 stainless steel pan head phillips self drilling screw
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
inch thread size 6-20
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 410
Answers.
Steel comp 410
Pan
Right-hand
Schedule B number: 7318152000
nmfc 096640
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
NSN 5305-01-572-7687 SCREW,SELF-DRILLING
Used on mk 105 power supply ptu-18/m. inch thread size 6-20 410 stainless steel pan head phillips self drilling screw pan head style right-hand
- NIIN
- 015727687
- NIIN Date
- 03/24/09
- Schedule B
- 7318152000
- Name Code
- 38031
- FIIG
- A003B0
- QUP
- Historical Price
- $0.53 PG
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
Availability for 92364A160 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 70.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 096640 SCREWS, IRON OR STEEL
- UFC (universal freight code)
- 50600
Similar by Design Other screws with similar characteristics
Nothing similar to this part number was found in our inventory
92364A160 / Screw,self-drillingWhat is the formal definition of this item?
A hardened, externally-threaded fastener with a self-drilling point. it drills, taps and fastens and may have a machine screw thread or a nonmachine screw thread. the threads usually extend from behind the pilot to the bearing surface of the head.
