Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 37C301770P108 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a nut thread
The minimum and maximum pitch diameter limits of a straight screw thread.
+0.2080/+0.2096in. stud thread
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand nut thread
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand stud thread
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.420in. stud thread and 0.470in. stud thread ⁓31/64"
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.720in. nut thread ⁓47/64"
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
1.280in. and 1.300in. ⁓1-5/16"
0.140in. and 0.160in.
0.180in. and 0.190in.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
20 stud thread
A designation that is used for the purpose of general identification of the thread.
0.250in. stud thread ⁓1/4"
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
lock thds in stud end
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ams 5637 assn std single material response
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
recessed
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
uns stud thread
Answers.
Uns stud thread
Recessed
Steel
20 stud thread
0.720 inches minimum nut thread
0.420 inches minimum stud thread and 0.470 inches maximum stud thread
Right-hand stud thread
Right-hand nut thread
3a nut thread
FSC 5307 ⁓ Studs
NSN 5307-00-471-1828 STUD,RECESSED
uns stud thread thread series recessed lock thds in stud end 20 stud thread thread quantity per inch 1.280" overall length 0.720" nut thread thread length right-hand stud thread 3a nut thread thread class
- NIIN
- 004711828
- NIIN Date
- 03/09/72
- Schedule B
- Name Code
- 15945
- FIIG
- A051A0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Brazil
- - Malaysia
- - Republic of Korea
Availability for 37C301770P108 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other studs with similar characteristics
Nothing similar to this part number was found in our inventory
37C301770P108 / Stud,recessedWhat is the formal definition of this item?
A headless fastener not exceeding twelve inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. one end or both ends may have a point. the unthreaded section may have more than one diameter, none of which may be greater than the maximum major thread diameter. it may be thread relieved. excludes items with taper threads.
