Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 517124 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a nut thread
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a stud thread
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand nut thread
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand stud thread
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
1.000in. nut thread and 1.100in. nut thread ⁓1-7/64"
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
1.000in. stud thread and 1.100in. stud thread ⁓1-7/64"
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
7.020in. and 9.080in. ⁓9-3/32"
0.290in. and 0.310in.
0.240in. and 0.252in.
The distance,measured along a straight line parallel to the longitudinal axis,from the center of the cotter pin hole to the nut end of the item.
0.120in. first hole and 0.130in. first hole
The length of a straight line which passes through the center of the cotter pin hole,and terminates at the circumference.
0.062in. first hole and 0.075in. first hole
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
24 stud thread
A designation that is used for the purpose of general identification of the thread.
0.312in. stud thread ⁓5/16"
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
recessed at both ends of shank
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 310 or steel or steel
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
AISI310 assn std 1st material response and AMS5613 assn std 2nd material response and MS7470 mil spec single material response
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
recessed and stepped
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unf stud thread
Answers.
1EA
Unf stud thread
Recessed and stepped
Steel comp 310 or steel or steel
24 stud thread
1.000 inches minimum stud thread and 1.100 inches maximum stud thread
1.000 inches minimum nut thread and 1.100 inches maximum nut thread
Right-hand stud thread
Right-hand nut thread
3a stud thread
3a nut thread
FSC 5307 ⁓ Studs
NSN 5307-00-942-5580 STUD,RECESSED AND STEPPED
unf stud thread thread series recessed passivate surface treated recessed at both ends of shank 24 stud thread thread quantity per inch 7.020" overall length 1.000" stud thread thread length right-hand stud thread 3a stud thread thread class
- NIIN
- 009425580
- NIIN Date
- 12/23/65
- Schedule B
- Name Code
- 15943
- FIIG
- A051A0
- QUP
- 1
- Historical Price
- $50.20 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Major End Users Countries and entities
- - Department of The Navy
- - Department of The Air Force
- - Greece
Availability for 517124 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other studs with similar characteristics
Nothing similar to this part number was found in our inventory
517124 / Stud,recessed and steppedWhat is the formal definition of this item?
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends on which the nominal diameter of one threaded section is greater than the other. the unthreaded section must have more than one diameter, none of which may be larger than the maximum major diameter of the larger thread. it may be thread relieved. excludes items with tapered threads.
