Serving our customers with quality and safety first.
2a nut thread
RIGHT-Hand nut thread
RIGHT-Hand stud thread
1.125in. nut thread ⁓1-1/8"
1.125in. stud thread ⁓1-1/8"
2.250in. ⁓2-1/4"
2355-01-559-0791
16 stud thread
24 nut thread
0.375in. nut thread ⁓3/8"
0.375in. stud thread ⁓3/8"
stud plain, general purpose
steel comp 301 or steel comp 302 or steel comp 302b or steel comp 303 or steel comp 303se or steel comp 304 or steel comp 304l or steel comp 305 or steel comp 308 or steel comp 309 or steel comp 309s or steel comp 310 or steel comp 310s or steel comp 314 or steel comp 316 or steel comp 316l or steel comp 317 or steel comp 321 or steel comp 347 or steel comp 348 or steel comp 385 or steel comp 384
passivate
unc stud thread
unf nut thread
Unf nut thread
Unc stud thread
Steel comp 301 or steel comp 302 or steel comp 302b or steel comp 303 or steel comp 303se or steel comp 304 or steel comp 304l or steel comp 305 or steel comp 308 or steel comp 309 or steel comp 309s or steel comp 310 or steel comp 310s or steel comp 314 or steel comp 316 or steel comp 316l or steel comp 317 or steel comp 321 or steel comp 347 or steel comp 348 or steel comp 385 or steel comp 384
24 nut thread
16 stud thread
1.125 inches stud thread
1.125 inches nut thread
Right-hand stud thread
Right-hand nut thread
2a nut thread
FSC 5307 ⁓ Studs
Used on 2355-01-559-0791. unf nut thread thread series passivate surface treated stud plain, general purpose 24 nut thread thread quantity per inch 2.250" overall length 1.125" stud thread thread length right-hand stud thread 2a nut thread thread class
1. | MS51864 | Cage 80205 |
2. | NASM51864-204-18 | Cage 80205 |
Nothing similar to this part number was found in our inventory
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. the maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). the unthreaded portion must be without locking or wrenching provisions. it may be thread relieved. see also rod, threaded end and rod, continuous thread.