Serving our customers with quality and safety first.
2a nut thread
2a stud thread
RIGHT-Hand nut thread
RIGHT-Hand stud thread
1.000in. stud thread ⁓1/64"
3.500in. nut thread ⁓3-1/2"
5.500in. ⁓5-1/2"
9 nut thread
9 stud thread
0.875in. nut thread ⁓7/8"
0.875in. stud thread ⁓7/8"
wrenching flats on nut end 0.625 in. lg, 0.625 in. w across flats, std steel washer and hex. nut included
steel
unc nut thread
unc stud thread
1SE
Unc stud thread
Unc nut thread
Steel
9 stud thread
9 nut thread
3.500 inches minimum nut thread
1.000 inches minimum stud thread
Right-hand stud thread
Right-hand nut thread
2a stud thread
2a nut thread
FSC 5307 ⁓ Studs
unc stud thread thread series wrenching flats on nut end 0.625 in. lg, 0.625 in. w across flats, std steel washer 9 stud thread thread quantity per inch 5.500" overall length 3.500" nut thread thread length right-hand stud thread 2a stud thread thread class
1. | C-161-299PC4-5- | Cage 11440 |
2. | C-161-299PC4-5.5 | Cage 11440 |
Nothing similar to this part number was found in our inventory
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. the maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). the unthreaded portion must be without locking or wrenching provisions. it may be thread relieved. see also rod, threaded end and rod, continuous thread.