Serving our customers with quality and safety first.
3a nut thread
+0.1743/+0.1758in. stud thread
RIGHT-Hand nut thread
RIGHT-Hand stud thread
0.312in. nut thread ⁓5/16"
0.500in. stud thread ⁓1/2"
0.875in. ⁓7/8"
0.109in. first hole
0.062in. first hole
24 stud thread
32 nut thread
23.0 rockwell c
0.190in. nut thread ⁓13/64"
0.190in. stud thread ⁓13/64"
navy special project
steel comp 8740
ams 6322 assn std single material response
cadmium
ams 2400 assn std single treatment response
unf nut thread
uns stud thread
Uns stud thread
Unf nut thread
Steel comp 8740
32 nut thread
24 stud thread
0.500 inches minimum stud thread
0.312 inches minimum nut thread
Right-hand stud thread
Right-hand nut thread
3a nut thread
FSC 5307 ⁓ Studs
uns stud thread thread series cadmium surface treated navy special project 32 nut thread thread quantity per inch 0.875" overall length 0.500" stud thread thread length right-hand stud thread 3a nut thread thread class
1. | 94692P008 | Cage 77445 |
Nothing similar to this part number was found in our inventory
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. the maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). the unthreaded portion must be without locking or wrenching provisions. it may be thread relieved. see also rod, threaded end and rod, continuous thread.