Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 93016K4109 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a nut thread
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
5a stud thread
The minimum and maximum pitch diameter limits of a straight screw thread.
+0.4435/+0.4485in. nut thread
The minimum and maximum pitch diameter limits of a straight screw thread.
+0.4526/+0.4555in. stud thread
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand nut thread
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand stud thread
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.503in. stud thread and 0.563in. stud thread ⁓37/64"
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
1.000in. nut thread and 1.120in. nut thread ⁓1-1/8"
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
2.000in. ⁓2-1/64"
The national stock number or the identification information of the end equipment for which the item is a part.
used on 93016C4100; end item is fuel pump, 600 gpm (FU604G) 4930-01-392-7579
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
13 stud thread
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
13 nut thread
A designation that is used for the purpose of general identification of the thread.
0.500in. nut thread ⁓1/2"
A designation that is used for the purpose of general identification of the thread.
0.500in. stud thread ⁓1/2"
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.
aaje
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
stud, double end, .500-13 unc
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 1213
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
sae 1113 crs, or equal assn std single material response
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
phosphate zinc
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
astm B633 type iv, SC1 assn std single treatment response
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.
tap end chamfered; nut end flat and chamfered or oval; tap end to have thread sealant, loctite no. 513 PRE-Applied (no sealant on first 1-2 threads)
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unc nut thread
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unc stud thread
Answers.
Unc stud thread
Unc nut thread
Steel comp 1213
13 nut thread
13 stud thread
1.000 inches minimum nut thread and 1.120 inches maximum nut thread
0.503 inches minimum stud thread and 0.563 inches maximum stud thread
Right-hand stud thread
Right-hand nut thread
5a stud thread
2a nut thread
FSC 5307 ⁓ Studs
NSN 5307-01-507-7461 STUD,PLAIN
Used on 93016c4100; end item is fuel pump, 600 gpm (fu604g) 4930-01-392-7579. unc stud thread thread series phosphate zinc surface treated stud, double end, .500-13 unc 13 nut thread thread quantity per inch 2.000" overall length 1.000" nut thread thread length right-hand stud thread 5a stud thread thread class
- NIIN
- 015077461
- NIIN Date
- 05/05/03
- Schedule B
- Name Code
- 15948
- FIIG
- A051A0
- QUP
- Historical Price
- $0.88 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Major End Users Countries and entities
- - U.s. Marine Corps
Availability for 93016K4109 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other studs with similar characteristics
Nothing similar to this part number was found in our inventory
93016K4109 / Stud,plainWhat is the formal definition of this item?
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. the maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). the unthreaded portion must be without locking or wrenching provisions. it may be thread relieved. see also rod, threaded end and rod, continuous thread.
