Serving our customers with quality and safety first.
3a nut thread
RIGHT-Hand nut thread
RIGHT-Hand stud thread
0.690in. stud thread and 0.810in. stud thread ⁓13/16"
0.690in. nut thread and 0.780in. nut thread ⁓25/32"
1.620in. ⁓1-5/8"
18 stud thread
24 nut thread
0.312in. nut thread ⁓5/16"
0.312in. stud thread ⁓5/16"
threads on stud end are of special design, both end have 0.680 in. dia hole bored through threads
steel comp 8740
unc stud thread
unf nut thread
1EA
Unf nut thread
Unc stud thread
Steel comp 8740
24 nut thread
18 stud thread
0.690 inches minimum nut thread and 0.780 inches maximum nut thread
0.690 inches minimum stud thread and 0.810 inches maximum stud thread
Right-hand stud thread
Right-hand nut thread
3a nut thread
FSC 5307 ⁓ Studs
unf nut thread thread series threads on stud end are of special design, both end have 0.680 in. dia hole bored through threads 24 nut thread thread quantity per inch 1.620" overall length 0.690" nut thread thread length right-hand stud thread 3a nut thread thread class
Nothing similar to this part number was found in our inventory
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. the maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). the unthreaded portion must be without locking or wrenching provisions. it may be thread relieved. see also rod, threaded end and rod, continuous thread.