Serving our customers with quality and safety first.
3a nut thread
+0.2854/+0.2869in. nut thread
+0.2854/+0.2869in. stud thread
RIGHT-Hand nut thread
RIGHT-Hand stud thread
0.750in. nut thread ⁓3/4"
0.750in. stud thread ⁓3/4"
2.750in. ⁓2-3/4"
24 nut thread
24 stud thread
28.0 rockwell c and 34.0 rockwell c
0.312in. nut thread ⁓5/16"
0.312in. stud thread ⁓5/16"
0.2819 in. min pitch dia first thread, 0.2839 in. max pitch dia first two threads
steel comp 4140 or steel comp 8640 or steel comp 8740
QQ-S-624 fed spec single material response
cadmium
unf nut thread
unf stud thread
Unf stud thread
Unf nut thread
Steel comp 4140 or steel comp 8640 or steel comp 8740
24 stud thread
24 nut thread
0.750 inches minimum stud thread
0.750 inches minimum nut thread
Right-hand stud thread
Right-hand nut thread
3a nut thread
FSC 5307 ⁓ Studs
unf stud thread thread series cadmium surface treated 0.2819 in. min pitch dia first thread, 0.2839 in. max pitch dia first two threads 24 stud thread thread quantity per inch 2.750" overall length 0.750" stud thread thread length right-hand stud thread 3a nut thread thread class
1. | 5307009958205 | Cage SCY13 |
Nothing similar to this part number was found in our inventory
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. the maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). the unthreaded portion must be without locking or wrenching provisions. it may be thread relieved. see also rod, threaded end and rod, continuous thread.