Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 803-7526226-4-S-E-C-12 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a stud thread
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand stud thread
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
1.780in. and 1.840in. stud thread ⁓1-27/32"
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
1.780in. and 1.840in. ⁓1-27/32"
The national stock number or the identification information of the end equipment for which the item is a part.
butterfly valve, 4 inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
18 stud thread
A designation that is used for the purpose of general identification of the thread.
0.3125in. stud thread ⁓21/64"
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
stud
The chemical compound or mechanical mixture properties of which the item is fabricated.
nickel alloy
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-DTL-1222 ty iv, gr 500 mil spec single material response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unc stud thread
Answers.
Unc stud thread
Nickel alloy
18 stud thread
1.780 inches minimum and 1.840 inches maximum stud thread
Right-hand stud thread
3a stud thread
FSC 5307 ⁓ Studs
NSN 5307-01-640-8080 STUD,PLAIN
Used on butterfly valve, 4 inch. unc stud thread thread series stud 18 stud thread thread quantity per inch 1.780" overall length 1.780" thread length right-hand stud thread 3a stud thread thread class
- NIIN
- 016408080
- NIIN Date
- 12/23/14
- Schedule B
- Name Code
- 15948
- FIIG
- A051A0
- Item Weight
- 0.000lbs
- Item Dimensions
- DEMIL / ITAR
- Uncontrolled item (Code )
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- --
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
Availability for 803-7526226-4-S-E-C-12 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other studs with similar characteristics
Nothing similar to this part number was found in our inventory
803-7526226-4-S-E-C-12 / Stud,plainWhat is the formal definition of this item?
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. the maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). the unthreaded portion must be without locking or wrenching provisions. it may be thread relieved. see also rod, threaded end and rod, continuous thread.
