Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 42R1087-1 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a nut thread
The minimum and maximum pitch diameter limits of a straight screw thread.
+0.2871/+0.2884in. stud thread
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand nut thread
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand stud thread
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.750in. stud thread ⁓3/4"
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
2.350in. nut thread ⁓2-23/64"
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
3.350in. ⁓3-23/64"
The distance,measured along a straight line parallel to the longitudinal axis,from the center of the cotter pin hole to the nut end of the item.
0.130in. first hole
The length of a straight line which passes through the center of the cotter pin hole,and terminates at the circumference.
0.080in. first hole
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
24 stud thread
A designation that is used for the purpose of general identification of the thread.
0.312in. stud thread ⁓5/16"
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
125.0 microinches
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 4130
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-S-6758 mil spec single material response
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
86349-MIL-I-6868 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) . and 77272-AMS14.01 standard (includes industry or association standards, individual manufactureer standards, etc.) .
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
uns stud thread
Answers.
1EA
Uns stud thread
Steel comp 4130
24 stud thread
2.350 inches nut thread
0.750 inches stud thread
Right-hand stud thread
Right-hand nut thread
3a nut thread
FSC 5307 ⁓ Studs
NSN 5307-00-762-7490 STUD,PLAIN
uns stud thread thread series 24 stud thread thread quantity per inch 3.350" overall length 2.350" nut thread thread length right-hand stud thread 3a nut thread thread class
- NIIN
- 007627490
- NIIN Date
- 01/01/60
- Schedule B
- Name Code
- 15948
- FIIG
- A051A0
- Item Weight
- 0.000lbs
- Item Dimensions
- QUP
- 1
- Historical Price
- $170.65 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Major End Users Countries and entities
- - Department of The Navy
- - Canada
Availability for 42R1087-1 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Bolts or nuts (iron or steel),(less than 35 feet)
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other studs with similar characteristics
Nothing similar to this part number was found in our inventory
42R1087-1 / Stud,plainWhat is the formal definition of this item?
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. the maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). the unthreaded portion must be without locking or wrenching provisions. it may be thread relieved. see also rod, threaded end and rod, continuous thread.
