Serving our customers with quality and safety first.
3a nut thread
3a stud thread
RIGHT-Hand nut thread
RIGHT-Hand stud thread
0.750in. stud thread ⁓3/4"
0.750in. nut thread ⁓3/4"
9.700in. ⁓9-45/64"
28 nut thread
28 stud thread
0.250in. nut thread ⁓1/4"
0.250in. stud thread ⁓1/4"
0.072 in. min, 0.077 in. max dia hole drilled through nut threads; CEN- ter of hole is 0.300 in. from end
steel comp 321 or steel comp 347
QQ-S-763 class 321 fed spec single material response
unf nut thread
unf stud thread
1EA
Unf stud thread
Unf nut thread
Steel comp 321 or steel comp 347
28 stud thread
28 nut thread
0.750 inches nut thread
0.750 inches stud thread
Right-hand stud thread
Right-hand nut thread
3a stud thread
3a nut thread
FSC 5307 ⁓ Studs
unf stud thread thread series 0.072 in. min, 0.077 in. max dia hole drilled through nut threads; cen- ter of hole is 0.300 in. from end 28 stud thread thread quantity per inch 9.700" overall length 0.750" nut thread thread length right-hand stud thread 3a stud thread thread class
Nothing similar to this part number was found in our inventory
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. the maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). the unthreaded portion must be without locking or wrenching provisions. it may be thread relieved. see also rod, threaded end and rod, continuous thread.