Serving our customers with quality and safety first.
2a nut thread
2a stud thread
RIGHT-Hand nut thread
RIGHT-Hand stud thread
1.000in. stud thread and 1.250in. stud thread ⁓1-1/4"
2.880in. nut thread and 3.120in. nut thread ⁓3-1/8"
9.690in. and 9.810in. ⁓9-13/16"
105 mm an/AWG-30 trainable gun mount and 105 mm gun, C130 acft
24 nut thread
24 stud thread
61.0 rockwell c and 62.0 rockwell c
0.375in. nut thread ⁓3/8"
0.375in. stud thread ⁓3/8"
125.0 microinches
tech order 11W1-33-7-2 fig 6
steel
QQ-T-570, class 1 or 2 fed spec single material response
unf nut thread
unf stud thread
1EA
Unf stud thread
Unf nut thread
Steel
24 stud thread
24 nut thread
2.880 inches minimum nut thread and 3.120 inches maximum nut thread
1.000 inches minimum stud thread and 1.250 inches maximum stud thread
Right-hand stud thread
Right-hand nut thread
2a stud thread
2a nut thread
FSC 5307 ⁓ Studs
Used on 105 mm an/awg-30 trainable gun mount and 105 mm gun, c130 acft. unf stud thread thread series tech order 11W1-33-7-2 fig 6 24 stud thread thread quantity per inch 9.690" overall length 2.880" nut thread thread length right-hand stud thread 2a stud thread thread class
1. | 9282881-01 | Cage 98752 |
Nothing similar to this part number was found in our inventory
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. the maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). the unthreaded portion must be without locking or wrenching provisions. it may be thread relieved. see also rod, threaded end and rod, continuous thread.