Serving our customers with quality and safety first.
2a nut thread
+0.3360/+0.3380in. stud thread
RIGHT-Hand nut thread
RIGHT-Hand stud thread
0.440in. stud thread ⁓29/64"
1.320in. nut thread ⁓1-21/64"
2.200in. and 2.230in. ⁓2-15/64"
16 nut thread
16 stud thread
0.375in. nut thread ⁓3/8"
0.375in. stud thread ⁓3/8"
with 0.282 in. min 0.286 in. max dia by 0.320 in. long pilot point on nut end
steel comp B1111 or steel comp B1112
unc nut thread
unc stud thread
1EA
Unc stud thread
Unc nut thread
Steel comp b1111 or steel comp b1112
16 stud thread
16 nut thread
1.320 inches minimum nut thread
0.440 inches minimum stud thread
Right-hand stud thread
Right-hand nut thread
2a nut thread
FSC 5307 ⁓ Studs
unc stud thread thread series with 0.282 in. min 0.286 in. max dia by 0.320 in. long pilot point on nut end 16 stud thread thread quantity per inch 2.200" overall length 1.320" nut thread thread length right-hand stud thread 2a nut thread thread class
1. | 14088827 | Cage 7X677 |
2. | 483543 | Cage 11862 |
3. | 14088827 | Cage 11862 |
Nothing similar to this part number was found in our inventory
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. the maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). the unthreaded portion must be without locking or wrenching provisions. it may be thread relieved. see also rod, threaded end and rod, continuous thread.