Serving our customers with quality and safety first.
3a nut thread a
3a nut thread b
RIGHT-Hand nut thread a
RIGHT-Hand nut thread b
0.540in. nut thread a ⁓35/64"
0.540in. nut thread b ⁓35/64"
9.36in. ⁓9-3/8"
B-52 aircraft
32 nut thread a
32 nut thread b
0.1900in. nut thread a ⁓13/64"
0.1900in. nut thread b ⁓13/64"
TIE-Rod "q" spring
all surfaces if machined from bar stock to be 250 microinches
steel comp 8630 or steel comp 4130
MIL-S-6050 mil spec 1st material response or MIL-S-6758 mil spec 2nd material response
finish per bac spec F-130 no primer on threads mfr ref single treatment response body
unf nut thread a
unf nut thread b
Unf nut thread b
Unf nut thread a
Steel comp 8630 or steel comp 4130
32 nut thread b
32 nut thread a
0.540 inches nut thread b
0.540 inches nut thread a
Right-hand nut thread b
Right-hand nut thread a
3a nut thread b
3a nut thread a
FSC 5307 ⁓ Studs
Used on b-52 aircraft. unf nut thread b thread series all surfaces if machined from bar stock to be 250 microinches tie-rod "q" spring 32 nut thread b thread quantity per inch 9.36" overall length 0.540" nut thread b thread length right-hand nut thread b 3a nut thread b thread class
1. | 3-40536 | Cage 81205 |
Nothing similar to this part number was found in our inventory
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. the maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). the unthreaded portion must be without locking or wrenching provisions. it may be thread relieved. see also rod, threaded end and rod, continuous thread.