Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 204767-1 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a nut thread
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a stud thread
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand nut thread
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand stud thread
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.230in. stud thread and 0.240in. stud thread ⁓1/4"
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.390in. nut thread and 0.400in. nut thread ⁓13/32"
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
0.880in. and 0.900in. ⁓29/32"
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
28 nut thread
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
28 stud thread
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
35.0 rockwell c and 42.0 rockwell c
A designation that is used for the purpose of general identification of the thread.
0.250in. nut thread ⁓1/4"
A designation that is used for the purpose of general identification of the thread.
0.250in. stud thread ⁓1/4"
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.
test
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
125.0 microinches
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ams 5643 assn std single material response
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
81349-MIL-I-6868 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unf nut thread
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unf stud thread
Answers.
1EA
Unf stud thread
Unf nut thread
Steel
28 stud thread
28 nut thread
0.390 inches minimum nut thread and 0.400 inches maximum nut thread
0.230 inches minimum stud thread and 0.240 inches maximum stud thread
Right-hand stud thread
Right-hand nut thread
3a stud thread
3a nut thread
FSC 5307 ⁓ Studs
NSN 5307-00-253-1554 STUD,PLAIN
unf stud thread thread series 28 stud thread thread quantity per inch 0.880" overall length 0.390" nut thread thread length right-hand stud thread 3a stud thread thread class
- NIIN
- 002531554
- NIIN Date
- 07/25/69
- Schedule B
- Name Code
- 15948
- FIIG
- A051A0
- QUP
- 1
- Historical Price
- $0.38 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
- - Department of The Army
- - Turkey
Availability for 204767-1 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 70.0
- LCL (less than a car load rating)
- 70.0
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Iron or steel, structural, (less than 35 feet)(see 825)
- NMFC (national motor freight code)
- 105000 DOWEL PINS I/S NOI IN BAG/BBL/BOXES
- UFC (universal freight code)
- 54080
Similar by Design Other studs with similar characteristics
Nothing similar to this part number was found in our inventory
204767-1 / Stud,plainWhat is the formal definition of this item?
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. the maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). the unthreaded portion must be without locking or wrenching provisions. it may be thread relieved. see also rod, threaded end and rod, continuous thread.
