Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 203495-2 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a nut thread
The minimum and maximum pitch diameter limits of a straight screw thread.
+0.2880/+0.2887in. stud thread
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand nut thread
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand stud thread
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.585in. nut thread ⁓19/32"
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.360in. stud thread and 0.370in. stud thread ⁓3/8"
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
1.340in. and 1.380in. ⁓1-25/64"
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
24 nut thread
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
24 stud thread
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
35.0 rockwell c and 42.0 rockwell c
A designation that is used for the purpose of general identification of the thread.
0.312in. nut thread ⁓5/16"
A designation that is used for the purpose of general identification of the thread.
0.312in. stud thread ⁓5/16"
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
125.0 microinches
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
navy special project
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
dry film lubricant on stud end thd
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ams 5643 assn std single material response
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
81349-MIL-I-6868 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unf nut thread
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
uns stud thread
Answers.
1EA
Uns stud thread
Unf nut thread
Steel
24 stud thread
24 nut thread
0.360 inches minimum stud thread and 0.370 inches maximum stud thread
0.585 inches nut thread
Right-hand stud thread
Right-hand nut thread
3a nut thread
FSC 5307 ⁓ Studs
NSN 5307-00-182-5877 STUD,PLAIN
uns stud thread thread series dry film lubricant on stud end thd navy special project 24 stud thread thread quantity per inch 1.340" overall length 0.360" stud thread thread length right-hand stud thread 3a nut thread thread class
- NIIN
- 001825877
- NIIN Date
- 05/20/70
- Schedule B
- Name Code
- 15948
- FIIG
- A051A0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $69.38 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
Availability for 203495-2 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other studs with similar characteristics
Nothing similar to this part number was found in our inventory
203495-2 / Stud,plainWhat is the formal definition of this item?
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. the maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). the unthreaded portion must be without locking or wrenching provisions. it may be thread relieved. see also rod, threaded end and rod, continuous thread.
