Serving our customers with quality and safety first.
3a nut thread
+0.2894/+0.2904in. stud thread
RIGHT-Hand nut thread
RIGHT-Hand stud thread
0.500in. nut thread ⁓1/2"
0.680in. stud thread ⁓11/16"
1.360in. and 1.400in. ⁓1-13/32"
0.110in. first hole
0.065in. first hole and 0.072in. first hole
18 stud thread
24 nut thread
26.0 rockwell c and 32.0 rockwell c
0.312in. nut thread ⁓5/16"
0.312in. stud thread ⁓5/16"
stud end drilled for cotter pin, 0.110 in. distance from cotter pin hole centerline to stud end, 0.065 in. min to 0.072 in. max cotter pin hole diameter
steel comp 8735
ams 6320 assn std single material response
cadmium
unf nut thread
uns stud thread
Uns stud thread
Unf nut thread
Steel comp 8735
24 nut thread
18 stud thread
0.680 inches minimum stud thread
0.500 inches minimum nut thread
Right-hand stud thread
Right-hand nut thread
3a nut thread
FSC 5307 ⁓ Studs
uns stud thread thread series cadmium surface treated stud end drilled for cotter pin, 0.110 in. distance from cotter pin hole centerline to stud end, 0.065 in. min to 0.072 in. max cotter pin hole diameter 24 nut thread thread quantity per inch 1.360" overall length 0.680" stud thread thread length right-hand stud thread 3a nut thread thread class
1. | 2023S9 | Cage 0AHP5 |
Nothing similar to this part number was found in our inventory
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. the maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). the unthreaded portion must be without locking or wrenching provisions. it may be thread relieved. see also rod, threaded end and rod, continuous thread.