Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 200253H41 specification
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.540in. nut thread ⁓35/64"
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.620in. stud thread ⁓5/8"
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
1.320in. ⁓1-21/64"
The distance,measured along a straight line parallel to the longitudinal axis,from the center of the cotter pin hole to the nut end of the item.
0.100in. first hole
The length of a straight line which passes through the center of the cotter pin hole,and terminates at the circumference.
0.065in. first hole and 0.072in. first hole
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
20 nut thread
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
28 stud thread
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
26.0 rockwell c and 32.0 rockwell c
A designation that is used for the purpose of general identification of the thread.
0.250in. nut thread ⁓1/4"
A designation that is used for the purpose of general identification of the thread.
0.250in. stud thread ⁓1/4"
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unc nut thread
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unf stud thread
Answers.
Unf stud thread
Unc nut thread
28 stud thread
20 nut thread
0.620 inches minimum stud thread
0.540 inches minimum nut thread
FSC 5307 ⁓ Studs
NSN 5307-00-839-9306 STUD,PLAIN
unf stud thread thread series 28 stud thread thread quantity per inch 1.320" overall length 0.620" stud thread thread length
- NIIN
- 008399306
- NIIN Date
- 01/01/60
- Schedule B
- Name Code
- 15948
- FIIG
- A051A0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 8399306 | Cage 19207 |
Major End Users Countries and entities
- - Greece
Availability for 200253H41 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- 50.0
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Bolts or nuts (iron or steel),(less than 35 feet)
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other studs with similar characteristics
Nothing similar to this part number was found in our inventory
200253H41 / Stud,plainWhat is the formal definition of this item?
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. the maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). the unthreaded portion must be without locking or wrenching provisions. it may be thread relieved. see also rod, threaded end and rod, continuous thread.
