Serving our customers with quality and safety first.
3a nut thread
3a stud thread
RIGHT-Hand nut thread
RIGHT-Hand stud thread
0.560in. stud thread ⁓9/16"
0.440in. nut thread ⁓29/64"
1.040in. and 1.080in. ⁓1-3/32"
20 stud thread
28 nut thread
26.0 rockwell c and 32.0 rockwell c
0.250in. nut thread ⁓1/4"
0.250in. stud thread ⁓1/4"
thd stud end 0.012 in.oversize
steel comp 3140
sae assn std single material response
unc stud thread
unf nut thread
Unf nut thread
Unc stud thread
Steel comp 3140
28 nut thread
20 stud thread
0.440 inches minimum nut thread
0.560 inches minimum stud thread
Right-hand stud thread
Right-hand nut thread
3a stud thread
3a nut thread
FSC 5307 ⁓ Studs
unf nut thread thread series thd stud end 0.012 in.oversize 28 nut thread thread quantity per inch 1.040" overall length 0.440" nut thread thread length right-hand stud thread 3a stud thread thread class
1. | 200211J2 | Cage 02978 |
2. | 118J2 | Cage 0AHP5 |
3. | 7540059 | Cage 19207 |
4. | 200211J2 | Cage 02978 |
5. | 118J2 | Cage 0AHP5 |
6. | 7540059 | Cage 19207 |
Nothing similar to this part number was found in our inventory
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. the maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). the unthreaded portion must be without locking or wrenching provisions. it may be thread relieved. see also rod, threaded end and rod, continuous thread.